RESOURCE GUIDE
Preventing water damage starts with finding the moisture source, repairing the entry point and giving rainwater a clear route away from the building. Roof drainage, wall flashing, window openings and door thresholds work together. When you notice a stain near a window, ask for an assessment of the surrounding construction as well as the window itself.
Why Can Water Appear Around a Window After Rain?
A wet sill can have several causes, including a leaking window joint, a blocked drainage channel or water entering the wall above the opening. Record where the water first appears, which rooms are affected and whether it happens during wind-driven rain or melting snow. These details help an installer investigate the water path.
An inspection should cover the opening, its flashing and the wall connection. Exterior sealant forms one part of that system. Keeping the Heat In explains the importance of drainage and flashing when protecting window and door openings.
How Can the Roof and Eavestroughs Affect Leaks?
Overflowing eavestroughs can concentrate runoff against walls. In winter, melting snow may refreeze at the roof edge, forming an ice dam that holds water back beneath the roofing. Ask a roofing professional to review suspected roof leaks and ice buildup, together with attic insulation and ventilation. The Insurance Bureau of Canada’s ice-dam guidance explains how this happens.

Illustration of gutter overflow concentrating runoff near an exterior wall.
Is It a Window Leak or Condensation?
Start by noting where the moisture sits and when it develops.
Moisture on the room-side glass during cold weather can indicate condensation associated with indoor humidity and a cold surface.
Moisture between the panes of a sealed glass unit can indicate an insulating-glass seal problem.
Water appearing at the frame, trim or wall during rainfall calls for an assessment of the opening and surrounding exterior.
Natural Resources Canada’s condensation guidance explains why glass temperature, humidity and air movement matter. Keep room air moving near the glass and use the home’s ventilation system as intended. Record persistent moisture so the cause can be assessed.

Illustration of room-side window condensation during cold weather.
What Should You Check Around Windows and Doors?
Look for changes during routine maintenance and after a storm. Keep a photo record so you can show an installer where conditions have changed.
Check for stained drywall, peeling paint, swollen trim and damp flooring around openings.
Look for gaps or deterioration in accessible exterior sealant joints.
Keep manufacturer-designed window weep holes and door drainage channels clear of debris.
Check that weatherstripping is intact and that the sash or door closes evenly.
Look for standing water at patio-door tracks and exterior thresholds.
Check that window wells, eavestroughs and downspouts are clear and draining away from the house.
Follow the product’s care instructions when cleaning tracks or drainage openings. CMHC’s moisture prevention checklist also recommends checking roof condition, exterior leakage points, downspouts and window wells.
How Do You Protect Entry and Patio Door Thresholds?
Review the sill, threshold and adjoining wall when water appears beneath an exterior door. Patio-door tracks need their intended drainage route, and entry-door seals need an even fit. An installer should also check the sill support, flashing and the exterior landing. Ask which parts need adjustment, maintenance or repair before choosing a replacement door.
When Is Window Repair or Replacement Appropriate?
The condition of the opening should guide the recommendation. A sound frame may need maintenance, hardware adjustment or a glass-unit repair. Rot, damaged framing or recurring water entry may require the opening to be exposed so its condition can be assessed. Ask what an insert replacement would retain and what a full-frame replacement would allow the installer to inspect.
Review our window installation and replacement services and Ontario window replacement cost guide when comparing the scope of proposed work.
What Should GTA Homeowners Check Seasonally?
For homes in Toronto, Mississauga, Oakville, Vaughan and surrounding GTA communities, plan a walk-around in spring and autumn. In spring, note staining after snowmelt and check runoff paths. In autumn, arrange eavestrough cleaning and inspect accessible seals before winter. After heavy rain, photograph any new marks and note the timing so an inspection can focus on the affected area.
What Should Be Planned for New Homes?
Coordinate windows and doors with the wall assembly before ordering. Ask your architect, builder and installer to review rough openings, sill details, flashing and the connection to air and water barriers. The project team should agree who prepares each opening and checks it before installation. Keep product schedules and installation details available through construction.
What Should You Do When You Find Water Damage?
Document the affected area, arrange prompt assessment and address the moisture source before repairing finishes. Persistent dampness, a musty odour or visible mould warrants further investigation. For moisture control and cleanup advice, consult Health Canada’s guide to moisture and mould.
Discuss Your Window or Door Project With WD Craftline
Share photos, your project address, the affected opening and when the moisture appears. WD Craftline can discuss window and door options, supply and installation requirements for replacement projects and new homes. Include any previous inspection findings so the team can understand the proposed work.
Start a window or door project inquiry, explore door installation services or use our service request page for support with an existing installation.
Frequently Asked Questions
Explore more resources
Browse more practical guides on planning, window styles, doors, energy efficiency, maintenance, and home design.


